11 40 000 Checking engine oil pressure (With Hydraulic Valve): Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Check all O-rings for damage, replace if necessary.

Fig 1: Identifying Filter Element

Courtesy of BMW OF NORTH AMERICA, INC.

Install filter element (1) in special tool 11 9 250.

Installation:

Coat O-ring with engine oil.

Fig 2: Identifying Filter Element With Special Tool (11 9 250)

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Engine oil pressure measurement is only possible with the diagnosis system.

Screw in special tool 11 9 250 with a filter element.

Secure special tool 13 6 051 with a sealing ring to special tool.

Start engine and check ENGINE OIL PRESSURE .

Fig 3: Identifying Special Tool (13 6 051 And 11 9 250)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.