Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove ENGINE .
- Mount engine on ASSEMBLY STAND .
- Remove CLUTCH (if fitted).
- Remove left and right engine support arm
- Remove oil sump.
Release screws (1).
Pull out oil pump intake pipe (2).
Tightening torque, see: 13 OIL SUMP.
Release screws (1).
Tightening torque: 11 13 6AZ .
Installation: