11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ ASA screws (connecting rod bolts) (12 x) Connecting rod bearing cap to connecting rod. |
N52K | M8 x 47 | Replace screws. Screws washed and oiled. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 20 Nm | |||
| Torque angle | 70° |