00 00 M18 and M18x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
M18 AND M18x1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
| Type | Thread | Measure | |
|---|---|---|---|
| Scope of applicability of tightening torques, refer to 00 00 Excerpt from company standard BMW GS 90003-2 | Surface colour / (surface coating) | ||
| M18 thread | yellow (ZN) | M18 8.8 | 280 Nm |
| silver (ZNS) | M18 8.8 | 225 Nm | |
| yellow (ZN) | M18 10.9 | 390 Nm | |
| silver (ZNS) | M18 10.9 | 330 Nm | |
| yellow (ZN) | M18 12.9 | 470 Nm | |
| silver (ZNS) | M18 12.9 | 365 Nm | |
| M18x1.5 thread | yellow (ZN) | M18x1.5 8.8 | 313 Nm |
| silver (ZNS) | M18x1.5 8.8 | 245 Nm | |
| yellow (ZN) | M18x1.5 10.9 | 440 Nm | |
| silver (ZNS) | M18x1.5 10.9 | 360 Nm | |
| yellow (ZN) | M18x1.5 12.9 | 527 Nm | |
| silver (ZNS) | M18x1.5 12.9 | 400 Nm |