00 00 M10 and M10 x 1 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
M10 AND M10 X 1 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
| Type | Thread | Measure | |
|---|---|---|---|
| Scope of applicability of tightening torques, refer to 00 00 Excerpt from company standard BMW GS 90003-2 | Surface colour / (surface coating) | ||
| M10 thread | yellow (ZN) | M10 8.8 | 47 Nm |
| silver (ZNS) | M10 8.8 | 38 Nm | |
| yellow (ZN) | M10 10.9 | 66 Nm | |
| silver (ZNS) | M10 10.9 | 56 Nm | |
| yellow (ZN) | M10 12.9 | 79 Nm | |
| silver (ZNS) | M10 12.9 | 62 Nm | |
| M10x1 thread | yellow (ZN) | M10x1 8.8 | 54 Nm |
| silver (ZNS) | M10x1 8.8 | 41 Nm | |
| yellow (ZN) | M10x1 10.9 | 75 Nm | |
| silver (ZNS) | M10x1 10.9 | 60 Nm | |
| yellow (ZN) | M10x1 12.9 | 91 Nm | |
| silver (ZNS) | M10x1 12.9 | 67 Nm |