21 52 Clutch Operation (Hydraulic)
WARNING: This page does not describe the selected car, but rather 167 other vehicles, including the 2006 BMW Z4, 2006 BMW X5, 2006 BMW X3, 2006 BMW M6, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH OPERATION TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hydraulic line to clutch slave cylinder or throttle. | E36 / E38 / E39 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E81 / E87 / E90 / E91 / E92 | 14.5 Nm | ||
| E46 | 20 + 5 Nm | ||||
| 2AZ | Clutch master cylinder to bearing block | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E85 / E86 / E81 / E87 / E90 / E91 / E92 / E93 | 22 Nm | ||
| E83 | 8 Nm | ||||
| 3AZ | Fitting screw, clutch master cylinder | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E81 / E87 / E90 / E91 / E92 / E93 | 22 Nm | ||
| 4AZ | Clutch master cylinder to pedal assembly | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 / E92 / E93 / E81 | 9 Nm | ||
| 5AZ | Clutch slave cylinder to clutch housing/transmission case | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 / E92 / E93 / E81 | 22 Nm | ||
| E60 / E63 | 7-speed SMG | 25 Nm | |||
| 6AZ | Pressure accumulator to hydraulic unit | E36 / M3 | 35 Nm | ||
| 7AZ | Coupling bolts for hydraulic pipes | E46 / M3 | 14 Nm | ||
| 8AZ | Pressure accumulator for hydraulic unit | E46 / M3 | 40 Nm | ||
| 9AZ | Clutch position sensor to clutch slave cylinder | E46 / E60 / E61 / E63 / E64 / E85 | 6-speed SMG | 2.5 Nm | |
| E60 / E61 / E63 | 7-speed SMG | 3.5 Nm | |||
| 10AZ | Banjo bolt, pipe, actuator/pump block | E60 / E61 / E63 | 7-speed SMG | 18 Nm | |
| 11AZ | Filler plug, expansion tank, pump block | E60 / E61 / E63 | 7-speed SMG | 2.1 Nm | |
| 12AZ | Throttle valve to clutch slave cylinder | E60, E61 | 17 Nm | ||