21 21 Clutch Disc And Drive Plate
WARNING: This page does not describe the selected car, but rather 167 other vehicles, including the 2006 BMW Z4, 2006 BMW X5, 2006 BMW X3, 2006 BMW M6, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH DISC AND DRIVE PLATE TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Work instruction | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Clutch to flywheel | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 8.8 | Replace screws | 25 Nm |
| E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 10.9 | Replace screws | 34 Nm | ||
| Clutch to flywheel With ZNS bolts |
Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail |
||||
| E60 S85, E61 S85 | Jointing torque | 15 Nm | |||
| Torque angle | 25° | ||||
| N52, N53, M47T2, N46T, N54, E92 N54 N46T, N43, N45K, N47, M57T2 | M8 10.9 | Jointing torque | 15 Nm | ||
| Torque angle | 90° +/- 5° | ||||