00 7 500 Universal puller Kukko 17/K
WARNING: This page is about a different car, the 2006 MINI Cooper, 2005 MINI Cooper, 2004 MINI Cooper, 2003 MINI Cooper, and 2002 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For removing bearing inner race from drive flange at rear wheel bearing
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R55, R56, RR1, RR2
Order number: 00 7 500
Universal puller Kukko 17/K
Consisting of:
1 = 00 7 501 Pressure spindle with bridge
2 = 00 7 502 Adjusting spindle (2 x) with knurled nuts (4x)
3 = 00 7 503 Pressure spindle, side
4 = 00 7 504 Adjusting jaws (2 x)
5 = 00 7 505 Adjusting screws (2 x) with nuts
NOTE:
For adjusting jaw (2 x)
6 = 00 7 506 Extension (2 x)
7 = 00 7 507 Bridge