11 36 Variable Camshaft Control
WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
VARIABLE CAMSHAFT CONTROL TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS to inlet camshafts | N14 | M10x52 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Sprocket wheel to exhaust camshafts | N14 | M10x30 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ Non-return valve VANOS to cylinder head N14 | M14 x 1.5 | Replace sealing ring | 13 Nm | |
| 4AZ Solenoid valve holder to crankcase | N14 | M6x16 | 9 Nm |