11 21 Crankshaft and Bearings
WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS TIGHTENING TORQUES SPECIFICATION
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Torsion damper (hub) to crankshaft (central bolt) |
N14 |
M14 x1.5 x74 |
Replace screws
Lightly oil screws and threads |
|
| |
|
|
Jointing torque |
50 Nm |
| |
|
|
Torque angle |
100 ° |