12 12 011 Replacing all spark plugs (N12)
WARNING: This page is about a different car, the 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 12 1 172
- 12 1 220
Necessary preliminary tasks:
Switch off ignition.
Unscrew and remove spark plugs with Special Tool 12 1 220.
Installation:
Tighten spark plugs, using special tool 12 1 220 in conjunction with special tool 12 1 172.
If special tool 12 1 172 is not used, observe tightening torque, for tightening torque refer to 12 12 2AZ in 12 12 SPARK PLUGS .