11 23 010 Removing and installing or replacing vibration damper (N14)

WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove right Wheel Arch Line .
Remove Drive Belt .

Release screws (1).

For tightening torque refer to 11 23 1AZ in 11 23 VIBRATION DAMPER .

Remove vibration damper.

Fig 1: Vibration Damper Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.