11 37 Variable valve gear
WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
VARIABLE VALVE GEAR TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Fitting screw for guide block to cylinder head | N12 | M6x35 | 10 Nm | |
| 2AZ Gate to cylinder head | N12 | M6x28 | 10 Nm | |
| 3AZ Return spring to cylinder head | N12 | M6x20 | 10 Nm | |
| 4AZ Electric servodrive to cylinder head | N12 | M6x16 | 8.5 Nm | |
| 5AZ Sensor wheel (magnet sensor) to camshaft | N12 | M6x20 | 8 Nm | |
| 6AZ Eccentric shaft sensor to cylinder head | N12 | M6x12 | 10 Nm |