11 36 Variable Camshaft Control
WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
VARIABLE CAMSHAFT CONTROL TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS to inlet and exhaust camshafts | N12 | M10x52 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N12 | M14 x 1.5 | Replace sealing ring | 13 Nm |
| 3AZ Solenoid valve holder to crankcase | N12 | M6x16 | 9 Nm |