11 31 Camshaft
WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
CAMSHAFT TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Guide rail, crankcase | N12 | M8x1.25 | Replace sealing ring | 24 Nm |
| 2AZ Guide rail to cylinder head | N12 | M8 | Replace sealing ring | 20 Nm |
| 3AZ Line to cylinder head | N12 | M6x20 | 8 Nm | |
| 4AZ Chain tensioner to cylinder head | N12 | M22 x 1.5 | Replace sealing ring | 65 Nm |