11 22 Flywheel
WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
FLYWHEEL TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Flywheel to crankshaft (automatic transmission) | N12 | M9x1.25 | Replace screws | |
| 1. Jointing torque | 8 Nm | |||
| 2. Jointing torque | 30 Nm | |||
| 3. Final tightening | 90 ° | |||
| 2AZ DM flywheel to crankshaft (manual transmission) | N12 | M9x1.25 | Replace T55 screw | |
| 1. Jointing torque | 8 Nm | |||
| 2. Jointing torque | 30 Nm | |||
| 3. Final tightening | 90 ° |