72 11 030 Removing And Installing/Replacing Front Left Or Right Seat Belt
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove panel for door post . See 51 43 148 REMOVING AND INSTALLING OR REPLACING TRIM ON LEFT OR RIGHT DOOR PILLAR (TOP) .
- Remove outer cover on front seat . See 52 14 040 REMOVING AND INSTALLING/REPLACING OUTER COVER ON FRONT LEFT OR RIGHT SEAT (NORMAL/ELECTRIC) .
WARNING:
Read and comply with safety regulations
for handling airbag modules and pyrotechnical belt tensioners. . See 72 00 ... SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
Improper handling can lead to triggering of the pyrotechnical seat belt tensioner or side airbag, resulting in injuries.
Improper handling can lead to triggering of the pyrotechnical seat belt tensioner or side airbag, resulting in injuries.
Switch off ignition!
Release screw (1).
Installation:
Tightening torque. See PARTS AND ACCESSORIES - TIGHTENING TORQUES - ALPINA .
Release screws (1) and remove belt guide (2).
Release screw (3) and remove belt (4).
Tightening torque. See PARTS AND ACCESSORIES - TIGHTENING TORQUES - ALPINA .
If necessary, release screws (5) and remove connecting plate for belt deflection fitting (6).
Tightening torque. See PARTS AND ACCESSORIES - TIGHTENING TORQUES - ALPINA .
Release screw (1).
Remove automatic reel (3).
Tightening torque. See PARTS AND ACCESSORIES - TIGHTENING TORQUES - ALPINA .
Installation:
Coding (2) of automatic reel must be seated in opening of body.
Retaining screw (1) secures belt retractor.