51 12 435 Replacing Left Or Right Body Molding From Sides Of Rear Bumper

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Unclip body molding (1) with special tool 00 9 317 and remove.

Fig 1: Identifying Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing version with Chromeline:

Release catches (1) and remove chrome trim from body molding (2).

Fig 2: Identifying Chrome Trim From Body Molding And Catches

Courtesy of BMW OF NORTH AMERICA, INC.