34 41 682 Initializing Parking Brake (After Mechanical Unlocking Of Actuating Unit)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
With mechanical emergency release of actuating unit, max. torque at end stop 5 Nm.
Vehicle condition before initialization:
Vehicle condition before initialization:
- Vehicle at standstill
- Ignition turned on
Touch parking brake button three times at intervals of 5 seconds.
1st touch operation:
Release position is initialized.
2nd touch operation:
Tightening of actuating unit.
Braking position is initialized.
Parking brake indicator lamp lights up red.
3rd touch operation:
Release of actuating unit.
Parking brake is ready for operation again.
Parking brake indicator lamp goes out.