33 21 001 Removing And Installing / Replacing Left Output Shaft
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Scalding hazard!
Only perform the following tasks after the vehicle has cooled down.
Only perform the following tasks after the vehicle has cooled down.
IMPORTANT:
Observe safety instructions on raising the vehicle
. See 00 ... ... RAISING VEHICLE WITH TROLLEY JACK
.
Necessary preliminary tasks:
- Remove exhaust system up to catalytic converter . See 18 00 020 REMOVING AND INSTALLING COMPLETE EXHAUST SYSTEM (N62) .
The subsequent procedure is described in 33 21 002 REMOVING AND INSTALLING / REPLACING RIGHT OUTPUT SHAFT .