11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW X5, 2010 BMW X3, 2009 BMW X5, 2009 BMW X3, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS AND BEARINGS - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ ASA screws (connecting rod bolts) (12 x) Connecting rod bearing cap to connecting rod. |
N52K | M8 x 47 | Replace screws. Screws washed and oiled. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 20 Nm | |||
| Torque angle | 70 ° |