11 21 Crankshaft and Bearings
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW X5, 2010 BMW X3, 2009 BMW X5, 2009 BMW X3, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screw (central screw) (1 x) Hub of vibration damper to crankshaft. |
N52K | M16 x 80 | Replace screw. Screw and thread are lightly oiled. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 100 Nm | |||
| Torque angle | 360 ° |