22 11 070 Removing and installing/replacing engine mounting bracket
WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- In assembly position
- Support engine and transmission with car jack
Release nut (1) and remove grounding strap.
Tightening torque: 22 11 7AZ, see 11 ENGINE SUSPENSION
Release screws (2) and nuts (3).
Tightening torque: 22 11 1AZ/2AZ, see 11 ENGINE SUSPENSION
Remove engine support bracket.