11 66 000 Removing And Installing/Replacing Vacuum Pump (N12)

WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Release vacuum connection to brake booster.

Release screws (1).

Pull out vacuum pump (2).

Fig 1: Identifying Vacuum Pump

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace sealing ring (1).

Fig 2: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.