11 43 000 Removing And Installing/Replacing Guide Tube For Dipstick (N12)

WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Pull dipstick out of guide tube.

Release screw (2).

Tightening torque: See ENGINE - TIGHTENING TORQUES .

Pull dipstick (1) up in direction of arrow.

Installation:

Replace O-ring.

Fig 1: Pulling Dipstick

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Check engine oil level, top up if necessary