11 23 010 Removing And Installing Or Replacing Vibration Damper (N12)

WARNING: This page is about a different car, the 2008 MINI Cooper and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove drive belt.

Release screws (1).

Tightening torque: See ENGINE - TIGHTENING TORQUES .

Remove vibration damper.

Fig 1: Identifying Vibration Damper Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.