51 22 300 Removing And Installing/Replacing Window Cavity Cover Strip On Rear Door On Left Or Right
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 317
- 00 9 324
IMPORTANT:
Observe procedure for using special tool 00 9 324.
IMPORTANT:
If reusing the existing window cavity cover strip (1), make sure it is not bent.
Lever out window cavity cover strip (1) with special tool 00 9 324 (starting at B-pillar).
At same time raise window cavity cover strip (1) with special tool 00 9 317 in area of B-pillar.