51 22 235 Removing And Installing/Replacing BOWDEN Cable For Inside Door Opener On Left Or Right Rear Door
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear door trim panel . See 42 REAR DOOR TRIM PANEL .
Unhook Bowden cable for release lever:
- Tighten release lever (1).
- Lever out lock (2).
- Detach Bowden cable (3) towards rear/top.
Installation:
For fitting, press release lever (1) fully onto door trim panel.