51 16 026 Replacing Mirror Glass For Rear-View Mirror (On Front Door)

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

WARNING: Move mirror glass with hand carefully and slowly.
If mirror glass is damaged:
Wear protective goggles and cut-proof gloves.
Risk of injury by flaking-off glass splinters.

IMPORTANT: Bring door mirror to room temperature to prevent catches from breaking off.
Remove glue between mirror glass and edge of housing (risk of damage).
Secure mirror glass against falling out.

Press mirror glass (1) at top by hand to full extent.

NOTE: Secure mirror glass (1) against falling out.

Unclip mirror glass (1) from below with special tool 00 9 317.

Disconnect associated plug connections and remove mirror glass (1).

Fig 1: Identifying Mirror Glass

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) must not be damaged.

Fit mirror glass (2) with retaining lugs (1) flush on mirror adjusting drive and clip into place.

Ensure correct locking.

Make sure mirror adjusting drive functions correctly.

Fig 2: Identifying Mirror Glass With Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.