27 10 720 Replacing Servomotor (ATC 700)

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: After replacement, the "Repair" service function must be carried out with in the BMW diagnosis system.

Disconnect plugs (1 and 2).

Tightening torque 27 00 14AZ, seeTRANSFER BOX IN GENERAL .

Fig 1: Identifying Plugs And Servomotor

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove servomotor from transfer box.

Tightening torque 27 00 13AZ, seeTRANSFER BOX IN GENERAL .

Fig 2: Locating Screws

Courtesy of BMW OF NORTH AMERICA, INC.