11 12 527 REMACHINING A Valve Seat - Cylinder Head Disassembled (N62)

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 3 520
00 3 580

Machine valve seat surface with special tool 00 3 520 or with 00 3 580 in accordance with tool manufacturer's instructions.

Fig 1: Identifying Machine Valve Seat Surface With Special Tool (00 3 520)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: After machining valve-seat surface: Remachine outside and inside diameters with correction milling tool to the specified diameters until you obtain valve seat width (5).

Valve-seat angle
Correction angle, external diameter
Correction angle, internal diameter
Valve seat, external diameter
Valve seat width

Items (1) to (5).

Fig 2: Identifying Valve-Seat Angle, Correction Angle And External Diameter

Courtesy of BMW OF NORTH AMERICA, INC.