54 34 085 Adjusting (tensioning) control element
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Relieve tension on control element
- Close convertible top completely
Move a piece of paper between pin and guide in marked area (3).
Tension control element (1) by turning.
Tension control element (1) until contact can be felt between pin, paper and guide.
Remove paper and tension control element (1) by another 1/2 turn.
Tighten lock nut (2).