LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1551 (Engine - Technical Data) >> 21 Crankshaft With Bearing >> 11 21 Crankshaft and Bearings N73

11 21 Crankshaft and Bearings N73

WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS N73 - TECHNICAL DATA

Ground sizes of main bearing journals - Bearing point 1
Standard yellow mm 69.974 +0.006
Standard green mm 69.967 +0.006
Original violet mm 69.961 +0.005
Stage 1 (U 0.25) yellow mm 69.724 +0.006
Stage 1 (U 0.25) green mm 69.717 +0.006
Stage 1 (U 0.25) violet mm 69.711 +0.005
Stage 2 (U 0.50) yellow mm 69.474 +0.006
Stage 2 (U 0.50) green mm 69.467 +0.006
Stage 2 (U 0.50) violet mm 69.461 +0.005
Crankshaft bearing clearance, radial mm 0.024...0.052
Maximum permitted runout on central crankshaft journal (crankshaft supported at bearing journals 1 and 5). mm 0.15
CRANKSHAFT AND BEARINGS N73 - TECHNICAL DATA

Ground sizes of main bearing journals - Bearing points 2 to 7
Standard yellow mm 69.984 +0.006
Standard green mm 69.977 +0.006
Original violet mm 69.971 +0.005
Stage 1 (U 0.25) yellow mm 69.734 +0.006
Stage 1 (U 0.25) green mm 69.727 +0.006
Stage 1 (U 0.25) violet mm 69.721 +0.005
Stage 2 (U 0.50) yellow mm 69.484 +0.006
Stage 2 (U 0.50) green mm 69.477 +0.006
Stage 2 (U 0.50) violet mm 69.471 +0.005
Crankshaft bearing clearance, radial mm 0.024...0.052
Maximum permitted runout on central crankshaft journal (crankshaft supported at bearing journals 1 and 5). mm 0.15
CRANKSHAFT AND BEARINGS N73 - TECHNICAL DATA

Ground sizes of main bearing journals - Bearing points 2 to 7
Standard yellow mm 69.984 +0.006
Standard green mm 69.977 +0.006
Original violet mm 69.971 +0.005
Stage 1 (U 0.25) yellow mm 69.734 +0.006
Stage 1 (U 0.25) green mm 69.727 +0.006
Stage 1 (U 0.25) violet mm 69.721 +0.005
Stage 2 (U 0.50) yellow mm 69.484 +0.006
Stage 2 (U 0.50) green mm 69.477 +0.006
Stage 2 (U 0.50) violet mm 69.471 +0.005
Crankshaft bearing clearance, radial mm 0.024...0.052 Maximum permitted runout on central crankshaft journal (crankshaft supported at bearing journals 1 and 5). mm 0.15
CRANKSHAFT AND BEARINGS N73 - TECHNICAL DATA

Ground sizes of conrod bearing journals - -
Standard mm 54.00 -0.009-0.025
Size 1 mm 53.75 -0.009-0.025
Size 2 mm 53.50 -0.009-0.025
Radial conrod bearing play mm 0.028...0.070
scientia non olet · About LEMON Manuals