11 12 Cylinder Head With Cover N73
WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER N73 - TECHNICAL DATA
| Cylinder head height: Original dimension | mm | 132.5 ± 0.05 |
| Machining limit | mm | 132.2 ± 0.05 |
| Valve guides are not available as replacement parts. | - | - |
| Inside diameter of installed valve guide | - | - |
| Standard | mm | 6.0 H7 |
| Tilt clearance, maximum (wear between valve and valve guide) |
mm | 0.5 |
| Bearing of camshaft | - | - |
| Guide bearing (width) | mm | 14.035...13.993 |