11 11 Engine Block, Cylinder Crankcase N62 B36
WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE N62 B36 - TECHNICAL DATA
| - | mm | 84.000 +0.014 |
| - | mm | 84.250 +0.014 |
| - | mm | 84.500 +0.014 |
| Permitted out -of-round of cylinder bore a) | mm | 0.007 |
| Permitted conicity of cylinder bore a) | mm | 0.01 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 |
|
||