11 21 Crankshaft and Bearings
WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS TIGHTENING TORQUES
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | - |
| - | - | - | Jointing torque | 5.0 Nm |
| - | - | - | Torque angle | 45° |
| Increment wheel on crankshaft | - | M5 10.9 | Replace screws | 13 Nm |
| Increment wheel on crankshaft | - | M5 8.8 | Replace screws | 5.5 Nm |