11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2010 BMW X5, 2010 BMW 650i, 2009 BMW X5, 2009 BMW 650i, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | M10 / M30 | Replace, wash and oil screws | 55 Nm | |
| M20 / M21 / M40 / M41 / M42 / M43 / M43TU / M44 / M47 / M47TU / M50 / M51 / M52 / M52TU / M54 / M56 / M57 / M57TU / S52 / S50 US / M70 / S70 / M73 / N40 / N42 / N45 / N46 / N62 / N73 / N62S / N62TU | Replace, wash and oil screws | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 70° | |||
| M60 / M62 | Replace, wash and oil screws | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 80° | |||
| M67 | Replace screws, do not wash off screw coating | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 85° |