11 14 Case Covers
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2010 BMW X5, 2010 BMW 650i, 2009 BMW X5, 2009 BMW 650i, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - CASE COVERS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Timing case and timing case cover top and bottom | M6 | 10 Nm | ||
| M7 | 15 Nm | |||
| M8 | 22 Nm | |||
| M10 | 47 Nm | |||
| 2AZ End cover, front/rear, to engine block | M6 | 10 Nm | ||
| M8 | 22 Nm | |||
| 3AZ Bearing pin to timing case cover | M51 / M41 / M47 | M42x1.5 | 65 Nm | |
| 4AZ Screw plug or connection piece to timing case cover Screw plug to timing case cover |
M51 / M41 / M47 | M20x1.5 | 30 Nm | |
| Screw plug to timing case cover | M57 / M47TU / M57TU | M30x1 | 70 Nm | |
| Screw plug to timing case cover | M57 / M47TU | M40x1.5 | 30 Nm | |
| 5AZ End cover, top/rear (water jacket), to engine block | N62TU / N73 | M6 | 10 Nm | |
| 6AZ Lower timing case cover to crankcase | N62TU | M8 | 20 Nm | |
| 7AZ Upper timing case to cylinder head | N62TU | M6 | 10 Nm | |
| 8AZ End cover, rear, to crankcase | N62TU | M6 | 10 Nm |