11 13 Oil Pan
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2010 BMW X5, 2010 BMW 650i, 2009 BMW X5, 2009 BMW 650i, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - OIL PAN
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Oil drain plug | M12 x 1.5 | 25 Nm | ||
| M18 x 1.5 | 35 Nm | |||
| M22 x 1.5 | 60 Nm | |||
| 2AZ Oil pan on engine block | M6 8.8 | 10 Nm | ||
| M6 10.9 | 12 Nm | |||
| N40 / N42 / N45 / N46 | M8 8.8 | Replace screws | 30 Nm | |
| M8 8.8 | 22 Nm | |||
| Oil sump, lower section to upper section | M6 8.8 | 10 Nm | ||
| N62TU | M8 | 24 Nm | ||
| M8 8.8 | 22 Nm | |||
| Oil sump bottom section to top section with microencapsulated screws | M6 10.9 | Replace screws | 12 Nm | |
| Oil sump upper section to crankcase | N62TU | M6 | 10 Nm | |
| N62TU | M8 | 20 Nm |