51 23 Hood/bonnet locks
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
HOOD/BONNET LOCKS - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E46 / E52 / E53 / E60 / E61 / E63 / E64 / E65 / E66 / E83 / E85 / E86 | 10 Nm | ||
| E38 / E39 | 12 Nm | ||||
| E36 | Hexagon screw | 10 Nm | |||
| Torx bolt | 12 Nm | ||||
| 2AZ | Lock to body (replace microencapsulated screws) | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 | 10 Nm | ||
| E65 / E66 / E85 / E86 | 8 Nm | ||||
| 3AZ | Lock to engine hood/bonnet (replace microencapsulated screws) | E36 / E46 / E52 | 10 Nm | ||
| E39 | 12 Nm | ||||