33 41 Wheel Bearings
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL BEARINGS - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Rear axle shaft to drive flange | E12, E21, E23, E24 | Collar nut yellow chromated | Replace collar nut | 435 Nm |
| E28 | Collar nut waxed white M22 | Replace collar nut | 190 Nm | ||
| E23, E24, E28, E32, E34 | Collar nut waxed white M27 | Replace collar nut | 250 Nm | ||
| 2AZ | Bearing unit on wheel carrier | E39 | Replace screws | ||
| Jointing torque | 30 Nm | ||||
| Torque angle | 90 ° | ||||
| E60 | Replace screws | ||||
| Jointing torque | 30 Nm | ||||
| Torque angle | 90 ° | ||||
| E53, E61, E63, E64, E65, E66 | 100 Nm | ||||
| 3AZ | Drive flange to axle shaft | E53, E60, E61, E63, E64, E65, E66, E67 | M27 | Replacing collar nut and lightly oil contact face | 420 Nm |
| E31, E36, E38, E39, E46, E52, E83, E85, E86 | M27 | Replacing collar nut and lightly oil contact face | 300 Nm | ||
| E36, E46, E85, E86 | M24 | Replacing collar nut and lightly oil contact face | 250 Nm | ||
| E30, E36 | M22 | Replacing collar nut and lightly oil contact face | 200 Nm | ||