65 75 055 Removing and installing/replacing emergency power siren with tilt sensor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove heater bulkhead, see 51 71 080 REMOVING AND INSTALLING/REPLACING HEATER BULKHEAD .
Unfasten plug connection (1) and disconnect.
Release screw (2) and remove emergency power siren (3) with emergency power siren holder in direction of arrow.
Installation:
Make sure emergency power siren holder is in correct installation position.
Release nut (1) and remove emergency power siren (2) from holder (3).