65 50 055 Removing and installing/replacing central information display
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove operator unit for heater/air conditioner, see 64 11 377 REMOVING AND INSTALLING CONTROL PANEL FOR HEATER - A/C SYSTEM (REPLACING, AUTOMATIC AIR CONDITIONING) .
Fold monitor (1) open.
Loosen screws (2).
Unlock plug connection for central information display (3) and disconnect.
Raise central information display (4) on passenger side.
Feed out associated wiring harness and remove central information display (4).
Installation:
Make sure wiring harness of central information display (4) is correctly routed.