65 11 070 Removing and installing/replacing CD changer

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove CD magazine
Remove storage compartment, see 51 16 200 REMOVING AND INSTALLING/REPLACING STORAGE COMPARTMENT (WITH CD CHANGER) .

Release screws (1) on both sides.

Tightening torque: 65 11 1AZ. , see 65 11 CD CHANGER

Pull CD changer (2) up and out.

Fig 1: Screws And CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove CD changer (2).

Fig 2: Plug Connections And CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Before installation, remove all transport securing screws on equipment floor and seal openings with adhesive spots.

Follow instructions on setting the installation location on the CD changer, see 65 11 ... Instructions on setting the installation location on the CD changer .