52 26 033 Removing and installing/replacing upper cover section on armrest for rear seat
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Drive out two-part hinge pin (1) with a suitable tool (bar, etc.), pressing material in area (2) on both sides (risk of damage).
Installation:
Drive in one hinge pin each from right and left. Hinge pins must be flush with outer edge of hinge.