51 71 470 Removing and installing/replacing trim on front left or right wheel arch
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove cover on sill, see 51 71 472 Removing and installing/replacing cover on left or right sill
Build date up to 09/2004:
- Remove trim on front side panel
Release blind rivets (1) and expander rivet (2).
Snap out trim (4) at clips (3) and feed out.
Installation:
If necessary, replace expander rivet (2) and/or clip (3).
Make sure trim (4) is correctly seated on underbody protection and bumper.
Version with M Technic aerodynamic kit:
Release blind rivets (1) and screw (2).
Snap out trim (4) at clips (3) and feed out.
Installation:
If necessary, replace faulty clips (3).
Make sure trim (4) is correctly seated on underbody protection and bumper.