51 71 041 Removing and installing/replacing rear left or right wheel arch cover
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear wheel
NOTE:
The operation is described on the left side; proceed in the same way for the right side.
Drill off blind rivets (1).
Unfasten screws (2) and nuts (3).
Carefully feed out wheel arch cover.
Installation:
Make sure wheel arch cover is correctly seated.