51 49 015 Removing and installing/replacing trim for rear window frame at top

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317 00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE)

Unclip trim (1) with special tool 00 9 317 from retainers (2) and remove in direction of arrow.

Installation:

If necessary, detach clips (2) from trim (1) and insert in rear lid.

If necessary, replace faulty clips (2).

Fig 1: Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

.Guides (1) on trim (2) must not be damaged.

Fig 2: Guides And Trim

Courtesy of BMW OF NORTH AMERICA, INC.