51 47 161 Removing and installing/replacing right luggage compartment wheel arch trim

Operation up to work on 12 V socket is identical to: 

Removing and installing/replacing left luggage compartment wheel arch trim, see 51 47 151 Removing and installing / replacing left luggage compartment wheel arch trim 

Lever out socket (1) in direction of arrow and pull off a little.

Fig 1: Socket

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) on socket (2).

Remove socket (2).

Fig 2: Plug Connection And Socket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Guide (1) and catches (2) on socket (3) must not be damaged.

Fig 3: Guide, Catches And Socket

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing 12 V socket: 

Open cover (1) of socket housing.

Turn socket insert (2) approx. 30° to right.

Turn socket insert (2) under tension back into initial position and pull out of socket housing.

Fig 4: Cover And Socket Insert

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Align socket insert (1) with retaining lugs (2) to groove (3) of socket housing and slide in until it is felt snapping into place.

Fig 5: Socket Insert, Retaining Lugs And Groove

Courtesy of BMW OF NORTH AMERICA, INC.