51 45 185 Removing and installing/replacing trim for pedal assembly

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Unclip trim for pedal assembly (4) at retaining points (2).

Remove rotary clip (3) and pull back trim for pedal assembly (4) in direction of arrow.

Disconnect associated plug connections and remove trim for pedal assembly (3).

Fig 1: Rotary Clip And Pedal Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locator tabs (1) of trim for pedal assembly (2) must not be damaged.

Replacement:

Unclip gong (3) and remove.
Remove footwell light (4).

Fig 2: Tabs, Pedal Assembly And Footwell Light

Courtesy of BMW OF NORTH AMERICA, INC.